Estimated read time: 1-2 minutes
This archived news story is available only for your personal, non-commercial use. Information in the story may be outdated or superseded by additional information. Reading or replaying the story in its archived form does not constitute a republication of the story.
DETROIT (AP) — Chrysler is recalling about 288,000 older Ram pickup trucks in North America and elsewhere because the rear axle can seize or the drive shaft can fall off.
The recall covers Ram 1500 pickups from the 2005 model year.
Chrysler says in documents posted Friday by U.S. safety regulators that the rear-axle pinion nut can come loose. That can cause problems that make the trucks spin out of control.
The recall comes after an investigation by the National Highway Traffic Safety Administration that began in June.
The agency found 15 complaints, including seven drivers who reported that the wheels locked at speeds over 50 miles per hour. Chrysler says there have been three crashes and one injury due to the problem.
The recall includes nearly 257,000 trucks in the U.S., another 22,000 in Canada, 8,800 in Mexico and 400 outside North America.
The affected trucks were made from Jan. 28, 2004 to Aug. 3, 2005, according to the documents.
In one complaint to NHTSA in February 2013, a pickup driver wrote that he was on an interstate highway when the drive shaft disconnected and the truck began to spin.
"It was five seconds of terror that I thought would surely end in disaster," the driver wrote. When the truck stopped it was blocking an entrance ramp, and the driver had to drag it to the shoulder in speeding traffic, the complaint said. Drivers who file complaints are not identified in NHTSA's database.
Dealers will install a fix at no cost to owners. The recall will begin in February. Customers can call Chrysler at (800) 853-1403 with questions.
Copyright © The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.