399 

Results for Industrial/Tool Storage

Knaack tool storage box

$1,200.00

Taylorsville, UT | 39 Mins
1200 obo more
16 0

Trailer to store a wood shop

$555.55

Eagle mountain, UT | 1 Hour
I started to convert it to a wood shop but I'm moving could also be turned into a "man" cave more
20 0

48" Job Box

$195.00

Heber City, UT | 1 Hour
48 w 24 d 28 h. Good shape, has some surface rust from being in the truck. Doesn't leak. more
10 0

6 Ft Metal Shelf

$50.00

Salt Lake City, UT | 1 Hour
Great for tools also could be 2 three Ft shelving units OBO 850 345 9650 more
5 0

Leather Tool Belt

$15.00

American Fork, UT | 1 Hour
Carpenter belt. Text if interested. more
367 2

Snap on top chest

$700.00

LEHI, UT | 3 Hours
Selling my tool box. I do not need it any more and need to make space. I used it as a field box for the back of my truck for more storage. Box is solid. &700 OBOThanks for looking, kim more
45 0

Stanley Toolbox

$20.00

Layton, UT | 3 Hours
2 ft 1" across more
15 0

30" Van

$2,000.00

Preston, ID | 3 Hours
This 30" Van has been used as a job site trailer. Everything on it works well. I have always hired someone with a tractor/Truck to move it to the site and then when the job is done have someone to come get it.. Tires are adequate to move the trailer but would need to be replaced before going past a port of entry. 2000.00 or best offer. more
38 0

Locking Keypad Charging Station.

$95.00

Murray, UT | 3 Hours
These rolling carts have a programable locking doors. The rolling carts are actually charging stations for tablets and laptops, but we have found they work best for us as tool charging and security stations. They retail for $600 each. We have two of them and we are selling them for $95 each. They are new. They have a handle to push them around and two locking casters. The wheels and handles have not been put on our carts in the pictures, they are in their boxes. All the details are below. Overall Dimensions:Length: 24 1/2"Width: 21 1/4" Height: 37 1/2" Here is a great website to see more details:http://www.webstaurantstore.com/luxor-h-wilson-lltm30-b-kp-30-tablet-laptop-charging-station-and-storage-cart/445LLTM30KPB.htmlWe are located right of the I-15 Freeway at 7200 south, just two blocks north of winco, the first road west of the freeway. Please give us a half hour heads up before coming over. Someone is normally there during daylight hours. Holds up to 30 tablets or laptops safely in placeRubber-coated dividers spaced 1" to keep equipment organizedVented on all four walls to prevent equipment overheatingIncludes 30-outlet electrical assembly to fully charge devices while in storageIncludes a programmable keypad lock to ensure high securityKeep cords organized with the cord wrap and clipsAll steel constructionFour 4" casters, two with brakesSecurely storing, charging, and transporting your tablets and laptops is easy with this Luxor / H. Wilson LLTM30-B-KP 30 device charging station and storage cart! This cart has 11" of clearance between its two shelves and rubber-coated dividers spaced 1" apart to protect and store up to 30 tablets or laptops at a time. Ventilation holes are located on all four sides of the unit to increase airflow and to prevent your devices from overheating, while a rear door allows access to two vertical 15-outlet electrical power strips designed to efficiently charge your devices overnight or during off-hours. To stay organized, use the cord wrap located on the side of the unit and the interior clips to prevent a messy tangle of cords inside the cabinet. For added security, this unit also comes with a programmable keypad, eliminating the need to keep up with a card or a set of keys. A password is easy to set up and use, and enables you to store your devices safely and securely. With a handle and a padded top, this black steel unit also includes four 4" non-skid casters, two with brakes. These make maneuvering easy from a classroom or a conference room to the storage area. This unit requires a 120V electrical connection for operation. more
592 3

Mesh Tool Security Storage Door Fronts Only

$45.00

Murray, UT | 3 Hours
We have a total of 10 of these Hallowell 33654 Wire Mesh Storage Locker security door fronts (Door fronts only, not the walls or ceiling). We are selling them for $45 each door front section. If you buy 6 or more the price comes down to $40 each. These door fronts retails for $275 each from Grainger. The doors are 48 inches wide and 89.75 inches tall. In each door section, there are two doors that open. Both are 46 inches wide. One of the doors is 31.5 inches tall the other is 42 inches tall. We are not selling the entire enclosure only the door fronts. These work out great by tossing them in front of pallet racking or something similar and block in the sides with your own plywood. Keeps tools or supplies from walking away at night. Here is a great ad on the Grainger Website::https://www.grainger.com/product/5JMP3?gclid=CIii8eLBxdICFUKTfgodSIICzw&cm_mmc=PPC:GOOGLEPLAA-_-Material%20Handling-_-Storage%20Lockers-_-5JMP3&AL!2966!3!56638278357!!!g!102627534357!&s_kwcid=AL!2966!3!56638278357!!!g!102627534357!&ef_id=WCJqagAAAR-k7fKw:20170307230958:sWe are located right of the I-15 Freeway at 7200 south, just two blocks north of winco, the first road west of the freeway. Please give us a half hour heads up before coming over. Someone is normally there during daylight hours.Information from the manufacturer:HALLOWELL DOUBLE TIER BULK STORAGE LOCKERSBulk storage locker provides secure storage to any facility. All steel storage locker offers easy installation while providing maximum security and strength. Ventilated locker allows light, air and sprinkler penetration. Bulk locker is made using 1/2" x 16 gauge flattened expanded metal doors and sides. Heavy gauge vertical frame channels and horizontal frame angles provide extra reinforcement. Doors feature welded brace and heavy duty 13 gauge, 7-knuckle hinges for strength. Welded padlockable hasp (lock sold separately) and ergonomic door pull for security. 13” transom on top of doors provide added overhead space. Gray powder coat finish. Locker is easily wall mounted to eliminate need for locker back panel (hardware not included).Product SpecificationsWIDTH INCHES 48HEIGHT INCHES. 90BRANDHallowellCOLOR FAMILY: GrayCOLOR FINISH: GrayCONSTRUCTION. Expanded MetalDESCRIPTION. Starter UnitMANUFACTURERS PART NUMBER: BSL364890-R-1S-PLSTYLE. Without Roof and Back more
537 7

57 Inch long Storage Hooks

$10.00

Murray, UT | 4 Hours
We are selling a total of 50 hooks which are new. We are selling them for $10 each. We had them custom made and paid $36 each to have them made shipped to us. They are made with solid 1/2 inch steel and rubber dipped. These hooks are heavy duty and can handle some serious weight. The hooks are 57 inches long with a 2 inch wide hook on top grab on to your upper support . The lower 5 hooks go wider to smaller with the largest opening being 4 inches wide and the smallest being 3.5 inches. We are located right of the I-15 Freeway at 7200 south, just two blocks north of winco, the first road west of the freeway. Please give us a half hour heads up before coming over. Someone is normally there during daylight hours. more
993 15

Work Bench Table Top, Balt Nido 72

$45.00

Murray, UT | 4 Hours
We have 4 new table tops that we are selling for $45 each. These actually are the table tops to a $440 Flipper table, but the bases were used with a different top so now we have these 8 tops left. There are two holes on either end to run power cords. The tops are 72 inches long and 23.25 inches wide. Here a the website of the original table. Again, we are only selling the tops and not the base. https://www.digitalbuyer.com/balt-nido-90283-72-x-24-adjustable-height-flipper-training-table.html?gclid=CIKvotGK5tACFVKGfgod5jUAeAWe are located right of the I-15 Freeway at 7200 south, just two blocks north of winco, the first road west of the freeway. Please give us a half hour heads up before coming over. Someone is normally there during daylight hours. more
2553 16

SuperSlide 12 ft. x 12 in. Ventilated Wire Shelf

$8.00

Murray, UT | 4 Hours
We have 100 wire shelves which are made by ClosetMaid. Each shelf is 12 feet long and 12 inches wide. We are selling them for $8 per 12 foot shelf section which is more than 1/2 off. The shelves are new. If you buy 6 shelves (the number of shelves in a box) the price comes down even more to $40 per box. We have 20 closet maid wall brackets that are 5 feet long we are selling for $5 each also . Sorry, we have no brackets.We are located right of the I-15 Freeway at 7200 south, just two blocks north of winco, the first road west of the freeway. Please give us a half hour heads up before coming over. Someone is normally there during daylight hours. Here is the information from the Home-Depot's website about them. This ClosetMaid SuperSlide 12 ft. x 12 in. Linen Shelf is perfect for folded clothes, garage and shop organizers, as the wire design allows for air circulation, helping to keep fresh and dust free. The 12 in. shelf depth offers space for storing bulky items and boxes securely. For added convenience, the SuperSlide closet rod and supports can be installed with the shelf to allow hangers to slide freely from end to end (rod and supports not included).Sturdy steel wire construction with a white finish120 lb. maximum weight capacityEasy to install with ClosetMaid hardware (sold separately)Can be cut to custom lengthsCompatible with both fixed-mount and ShelfTrack mounting systems more
189 5

Wire Cage, Prevent Loss Cabinet 96x94x30

$195.00

Murray, UT | 4 Hours
This is a $2,800 Security loss prevention cage that was damaged on shipping so it is being clearanced out for $195.. It is 8 feet tall, 94 inches wide, 40 inches deep. The cage has keyed locks but both the locks are damaged. you will have to replace or just use a chain around the doors. Also, some of the walls a bent. Please look closely at the pictures. We can load you with a forklift. Here is a website to check out more information :http://www.neobits.com/folding_guard_lpc_8030_8_prevent_loss_cabinet_p1799773.html?atc=gbp&gclid=COCbjO-l3tACFZRgfgodHmcNCQWe are located right of the I-15 Freeway at 7200 south, just two blocks north of winco, the first road west of the freeway. Please give us a half hour heads up before coming over. Someone is normally there during daylight hours. Item: Loss Prevention Security Cabinet Locker Door Type Ventilated Assembled/Unassembled Assembled Locker Type (1) Wide, (1) Opening Tier 1 Number of Shelves 0 Overall Width 94" Overall Depth 30" Overall Height 96" Material Galvanized steel Gauge 18 Finish Galvanized Color Silver Locking System Cylinder Lock Includes Cabinet Only more
2000 14

Survey Truck Bed Organizer

$595.00

Murray, UT | 4 Hours
This organizer is new and over 1/2 price. It sells for $1,695 plus $265 to have it shipped to Utah. It is new in the crate and has one small dent in the top corner from moving it around the warehouse. It is 47.25 inches wide, 17.25 inches tall and 74 inches long. All the manufactures information is below. Go to SurveyTruck.com to see a better ad for the organizer. We are located right of the I-15 Freeway at 7200 south, just two blocks north of winco, the first road west of the freeway. Please give us a half hour heads up before coming over. Someone is normally there during daylight hours. SURVEY TRUCK ORGANIZERSFOR ALL FULL SIZED PICKUPSThe original 74” long organizer fits in 8’ and 6.5’ pickup beds. It will stow your tripods at instrument height, saving you the hassle of collapsing and extending them. It weighs 240 pounds, far lighter than a wooden organizer. We have been making them for eleven years and some of them are now in their fourth survey trucks. That’s a life cycle cost you won’t get with anything else. $1,695 FOB Tucson AZ. Call or email for a freight quote; please give your destination zip code.FRAME CONSTRUCTIONFrame WeldingThe frame is MIG welded with ¾” x ¾” square tubing at Anewco Products in Tucson, AZ.Steel FrameThis a welded frame, just before it was sent off to the powder coating shop.2500 Pound Capacity: Ten Anewco employees are standing on this organizer. They total about 2,500 pounds of weight. Don’t try this with a Silver Shield organizer; you’ll crush it. more
1181 3

Vintage Tool Box

$20.00

West Jordan, UT | 4 Hours
Very awesome tool box! Includes 3 very old oil drums. $20 more
24 0

MANAGER

$1,400.00

Provo, UT | 4 Hours
mac maximizer in used condition more
61 0

Milwaukee 2017 stand up tool box $600 obo

$600.00

Payson, UT | 4 Hours
I've owned it for a couple months but I need money so it gotta go more
76 1

MANAGER

$1,500.00

Provo, UT | 4 Hours
snap on tool box more
44 0

Snap-on Master Series Double Bank

$2,500.00

Brigham, UT | 4 Hours
selling my Snap-On, double bank, everything works, drawers all slide smoothly, locks. if interested call or text Ryan 435-720-2187. does not include tools. more
1441 4

MANAGER

$1,450.00

provo, UT | 5 Hours
tool storage boxes , price varies !!! $1300.00 to $1900 make an offer more
75 0

42 inch International Tools Tool Box

$650.00

Midvale, UT | 5 Hours
New. Bought this toolbox new about a year ago, it has just been taking up space/ collecting dust. Features:* 11 drawers* Full length top drawer* Full extending slides* Gloss Red powder coat* Drawer liners* 2 keys* Top pad* Ball bearing slidesMeasures 41.5" W x18.5" D x 38.75" HPick it up today!!! Don't wait 1 to 2 months for delivery or pay $100 in shipping + tax. (No Trades) more
735 10

TOOL BOX FOR TRUCK $80.00 OBO

$80.00

NSL, UT | 5 Hours
Will fit any bed that is 50" - 58" wide.please only text.I do not have the keys to locks. more
39 0

Snap on Bottom Chest

$75.00

West Valley, UT | 8 Hours
Small Snap On bottom. Drawers work good. No door for the bottom compartment more
40 2