8,731 

Results for Industrial

Mitutoyo 500-193 Absolute Digital Caliper

$100.00

Layton, UT | 4 Mins
Brand New - Still in Box - $302 on Amazon!Mitutoyo 500-193 Absolute Digital Caliper, Stainless Steel, Battery Powered, Inch/Metric, 0-12" Range, +/-0.0015" Accuracy, 0.0005" Resolution The Mitutoyo ABSOLUTE 500 series caliper is a Digimatic digital caliper that is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology, which allows you to “set and forget” the origin and measure in awkward or difficult locations.This digital caliper has LCD readout and function control buttons on the caliper face, including Origin to set and retain the original measuring point, and Zero/ABS (Absolute Scale) to zero-set the LCD display. It uses the metric measuring system.Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper also has an LCD, which clearly shows values and increases reading reliability over the other types, and reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point you set, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting or concern of overspeed errors. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second.The calipers use the ABSOLUTE electrostatic capacitance linear encoder which helps prevent overspeed errors. They measure outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. LCD Resolution is 0.01mm. Also included are origin-setting, zero-setting, and on/off automatic shutoff function buttons. A Digital LCD Data Reading Hold function is available with the optional Data Hold Unit (sold separately). An alarm alerts the user to low voltage and scale contamination and counting value composition errors. A rolling thumb wheel makes fine adjustments and a thumb screw locks the scale’s position. Response speed is unlimited. Each caliper includes, and is powered by, one SR44 silver oxide cell battery that lasts approximately 3.5 years with continuous normal use.Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The digital caliper takes a differential by zeroing the display at any point along the slide, with an LCD that displays a single value in English and/or metric units. more
2 0

stainless steel kw 1680/t880 cab door top 8

$40.00

Salt lake, UT | 4 Mins
new in package pt#48060 more
463 0

Mitutoyo 205HL Micrometer

$70.00

Layton, UT | 8 Mins
Band new - still in box - A $205 valueStarrett 205HL Steel Mill Micrometer, Plain Thimble, Lock Nut, 0-1" Range, 0.001" Graduation, With HandleThis micrometer is specially designed for gaging hot metal sheet in steel mills and has many features for safer, faster, and more accurate measurements. Micrometer has rugged construction throughout, and is attached to a convenient wooden handle, correctly shaped for a firm grip. Allows measurements to be made while the micrometer can be comfortably held at a safe distance from the hot metal. Both spindle and anvil are beveled to easily slide onto the work. Large, reversible wing lock nut is easy to lock or release, even when wearing heavy gloves. Rugged frame construction and heavy duty spindle. Rigid one-piece frame of drop forged steel. Extremely hard and stable one-piece spindle. Micro-lapped measuring faces. Quick and easy adjustment by either the anvil or by a simple sleeve adjustment. more
2 0

Quonset Hut Building FRAME SECTION 8'X20'X14'

$350.00

Ogden, UT | 9 Mins
Military Portable Storage Building Frame Only8 Foot SectionQuonset HutUS Government Surplus8 Foot Long by 20 Foot Wide by 14 Foot TallUse This 8 Foot Section To Make Your Building Longer.Frame Is Made Of Either Magnesium Alloy Or A Titanium AlloyPicture is Just a Representation of what it looks like. Not The Actual Building, Or Length.Can Ship Truck Freight. Call Us For More InformationQuestions? Feel free to ask us! Just click on the link to e-mail us. We usually respond within 24 hours. You can also reach us at 1-800-464-1713. more
1573 16

Military Quonset Hut Portable Building FRAME

$2,000.00

Ogden, UT | 9 Mins
Military Portable Storage Building Frame OnlyQuonset HutUS Government Surplus40 Foot Long by 20 Foot Wide by 14 Foot Tall(5, 8 Foot Sections)Frame Is Made Of Either Magnesium Alloy Or A Titanium AlloyPicture is Just a Representation of what it looks like. Not The Actual Building Or Length.Can Ship Truck Freight. Call Us For More InformationQuestions? Feel free to ask us! Just click on the link to e-mail us. We usually respond within 24 hours. You can also reach us at 1-800-464-1713. more
1772 34

2001 work horse p42

$5,999.00

Pleasant Grove, UT | 10 Mins
We are selling this great Work horse. It has shelving, lift gate, was just serviced. With only 84000 miles. more
118 2

Aluminum Weatherguard Deep Truck Tool Boxes

$180.00

west valley city, UT | 13 Mins
All are full sized and extra deep Please read the add before calling, NO emails, NO texts, calls only. In good condition. Truck box not shown in pic for small truck $90, no keyTop truck Tool Box is an inbed truck box like new w key & In good condition $180Middle box is a full sized weatherguard saddlebox good condition $325 18.5"T, 20 1/4 w, 71 1/2 L Bottom box s an extra deep full sized weatherguard saddlebox 18.5"T, 28 w, 71 1/2 L $375 more
11 0

HILTI Drywall Screwdriver Bit

$35.00

West Valley City, UT | 14 Mins
HILTI drywall insert bits #2 PHL. 1/4 in Hex. Each package has 100 bits I have (2). $35 each. Please Text, Call or Email. (801) 599-4191. more
4 0

HILTI Drywall Screwdriver Bit

$35.00

West Valley City, UT | 16 Mins
HILTI drywall insert bits #2 PHL. 1/4 in Hex. Each package has 100 bits I have (2). $35 each. Please Text, Call or Email. (801) 599-4191. more
2 0

Rigid 18 Volt Lithium Ion Cordless Drill Combo Kit

$75.00

Santaquin, UT | 23 Mins
Rigid 18 Volt Lithium Ion Cordless Drill Combo Kit. This drill has been a great but I just don't use it like I did a year ago. Everything works great, batteries still charge and hold a great charge. It is very durable and light weight. The batteries have a life time warranty but I'm not sure if that transfers to you.I live in Santaquin but I work in Utah County and sometimes Salt Lake County.Thank you for looking more
4 0

60 Gallon Campbell Hausfeld Air Compressor

$500.00

Riverton, UT | 24 Mins
Used very little over the years. Just sits more
7 0

Bostich hardwood floor installation tool stapler

$200.00

Provo, UT | 25 Mins
This is a Bostich Pneumatic Floor Stapler and mallet.. Model MIII. For hardwood flooring installation. Lightly used. it was purchased in 2004 brand new, It has only been used to put in ONE floor. Other than that it has been collecting dust in a garage. It is in excellent condition. Come pick up your new nail gun. My phone does not upload pictures very well so please don't ask me to. Cash only. No texts, please leave a message. more
340 5

Hitachi roofing tool gun gently used

$200.00

Provo, UT | 25 Mins
This is a Hitachi NV45AB2 (s) Roofing nail gun. My husband used to be a roofing contractor. He has back problems now and has no use for the gun. This particular gun was only used through one roofing season. Fairly new and in excellent condition. Come pick up your new nail gun. Cash only please! My phone does not upload photos well so please do not ask. This is what it is. No Texts, Please leave a message. more
319 3

First gen cummins radiator and fan

$150.00

Ogden, UT | 27 Mins
Radiator is rebuild from Western radiator in Ogden UT off of my old truck and ready to use more
16 0

WORK BEDS WITH GOOSENECK HITCH

$6,795.00

Logan, UT | 28 Mins
TM BED BY CM. Beds have big front boxes in front of tires, small rear boxes behind tires, boxes on top that flip up, gooseneck hitch, bumper hitch, work lights, 4-2 foot airline strips. Price includedes instalation.Poulsen Trailer SalesLogan, UT435-752-5667DLR#1504poulsentrailers.com more
937 4

Dewalt 18 Volt 4 Pack

$105.00

Santaquin, UT | 34 Mins
Dewalt 18 Volt 4 Pack. It has been sitting in my garage for the last couple of years gathering dust so I thought I would sale them. The batteries charged but I'm not sure how long they work (I used them for a little while to make sure they still work). Everything works great. The drill has the hammer drill option. The handle of the case broke off so I screwed a strap that worked for a couple of years. I live in Santaquin but drive all through Utah County and sometimes Salt Lake County. Thank You for looking. more
4 0

SAE 300 Lincoln Welding Machine on Trailer

$6,000.00

Pleasant grove, UT | 40 Mins
For Sale Lincoln SAE 300 amp welding machine on trailerPowered by gas engineThis welder will work on stick welding, carbon arc or rather air arc, tig welding, wire feed welding.The welder has copper winding and will weld all day long. This welder is set up to run a wire feeder for mig, dual shield, outershield, innershield, etc.Also included are welding leadsAlso included is a LN-25 wire feeder ready to go to work. more
18 0

Chevy Truck

$2,500.00

Stockton, UT | 43 Mins
For Sale 1994 Chevy Truck 2500 flatbed, Runs great, 142K, new clutch and radiator. Good all around truck for farm or residential use. No texts or emails. more
40 0

Sand paper belt p100 grit

$50.00

Riverton, UT | 44 Mins
These are roughly 52" wide and the belt measures 103" in length. I have 5 or 6 of these. They are $50 ea. Half price more
155 1

26 HP Diesel tractor for sale--4x4 -loader

$8,900.00

Rexburg-- Idaho Fall area, ID | 45 Mins
$8900---YNM 2210-D 4x4 and 2 cylinder Diesel Engine with 26 engine HP has a 3 speed power shift shift on the fly without using the clutch 4x4 or shift to 2x4 new Roll-bar new tires, power-steering new loader runs strong the 2 Cylinder engines put out the torque--this is the bulletproof model that's easy to get parts for, simple as heck to work on and lasts forever see us at -- www biglittletractor.com... more
17 0

40 foot cargo worthy container delivered

$2,180.00

Pocatello, ID | 46 Mins
Have 40 foot containers for sale and will deliver this add is delivered to zip 84401 but I can deliver to other locations as well more
17 0

Lincoln Vantage 500

$7,250.00

Salt Lake City / Gillette WY, UT | 48 Mins
2012 LINCOLN VANTAGE 500Description: WELDER ARC 500 AMPGAS/DIESELMeter: 6,575Serial #: U1120104301Equipment #: 905604RAThis is a great deal for a used welder! Well maintained, often serviced, and include a 3 month Guarantee, so no risk in purchase! more
115 1

John deere 644k Wheel Loader

$151,500.00

Salt Lake City, UT | 49 Mins
2012 John Deere644KLOADER WHEEL 4.0 CUBIC YARDHours 5387Unit Number 10025967Diesel DrivenWell maintained, frequently servicedGreat machine with a 6 month Guarantee so no risk in purchase. Call Mike Nodurft 801 201 2335 with more questions. more
329 0

125 kw Generator

$12,000.00

Salt Lake City, UT | 49 Mins
2009 125 KW Generator.Great condition Hours - 13,425 Call with more questions Mike Nodurft 801 201 2335 more
121 2